Pre-Polished Connectors

Unicam ST multimode connector for fibers 62,5/125 μm, standard performance

Pre-polished Unicam ST standard performance multimode 62, 5/125 OM1 connector for an easy and quick termination of optical fibers without the use of resin or adhesive. The fiber to be used for the termination is spliced with the fiber already pre-installed and pre-polished into the connector by using a special gel which doesn't need any heating or electric power, thus granting a very high quality and minimizing the problems occurring within the harsh working conditions in installation sites. A special closure system, equipped with a light emitter, verifies the connection continuity and the success of the splicing. The Kit code 2040150 is to be used for the connectors' termination.

View details →

Unicam ST multimode connector for fibers 50/125 μm, standard performance

Pre-polished Unicam ST standard performance multimode 50/125 OM1 connector for an easy and quick termination of optical fibers without the use of resin or adhesive. The fiber to be used for the termination is spliced with the fiber already pre-installed and pre-polished into the connector by using a special gel which doesn't need any heating or electric power, thus granting a very high quality and minimizing the problems occurring within the harsh working conditions in installation sites. A special closure system, equipped with a light emitter, verifies the connection continuity and the success of the splicing. The Kit code 2040150 is to be used for the connectors' termination.

View details →

Unicam SC/APC single-mode connector for fibers 9/125 μm, standard performance

Pre-polished Unicam SC/APC standard performance single-mode 9/125 connector for an easy and quick termination of optical fibers without the use of resin or adhesive. The fiber to be used for the termination is spliced with the fiber already pre-installed and pre-polished into the connector by using a special gel which doesn't need any heating or electric power, thus granting a very high quality and minimizing the problems occurring within the harsh working conditions in installation sites. A special closure system, equipped with a light emitter, verifies the connection continuity and the success of the splicing. The Kit code 2040150 is to be used for the connectors' termination.

View details →

Unicam SC multimode connector for fibers 50/125 μm, standard performance

Pre-polished Unicam SC standard performance multimode 50/125 OM1 connector for an easy and quick termination of optical fibers without the use of resin or adhesive. The fiber to be used for the termination is spliced with the fiber already pre-installed and pre-polished into the connector by using a special gel which doesn't need any heating or electric power, thus granting a very high quality and minimizing the problems occurring within the harsh working conditions in installation sites. A special closure system, equipped with a light emitter, verifies the connection continuity and the success of the splicing. The Kit code 2040150 is to be used for the connectors' termination.

View details →

Unicam ST multimode connector for fibers 62,5/125 μm, High performance

Pre-polished Unicam ST standard high multimode 62, 5/125 OM1 connector for an easy and quick termination of optical fibers without the use of resin or adhesive. The fiber to be used for the termination is spliced with the fiber already pre-installed and pre-polished into the connector by using a special gel which doesn't need any heating or electric power, thus granting a very high quality and minimizing the problems occurring within the harsh working conditions in installation sites. A special closure system, equipped with a light emitter, verifies the connection continuity and the success of the splicing. The Kit code 2040150 is to be used for the connectors' termination.

View details →

Unicam ST multimode connector for fibers 50/125 μm OM3/OM4 , High performance

Pre-polished Unicam ST high performance multimode 50/125 OM3/OM4 connector for an easy and quick termination of optical fibers without the use of resin or adhesive. The fiber to be used for the termination is spliced with the fiber already pre-installed and pre-polished into the connector by using a special gel which doesn't need any heating or electric power, thus granting a very high quality and minimizing the problems occurring within the harsh working conditions in installation sites. A special closure system, equipped with a light emitter, verifies the connection continuity and the success of the splicing. The Kit code 2040150 is to be used for the connectors' termination.

View details →

Unicam ST multimode connector for fibers 50/125 μm, High performance

Pre-polished Unicam ST high performance multimode 50/125 OM1 connector for an easy and quick termination of optical fibers without the use of resin or adhesive. The fiber to be used for the termination is spliced with the fiber already pre-installed and pre-polished into the connector by using a special gel which doesn't need any heating or electric power, thus granting a very high quality and minimizing the problems occurring within the harsh working conditions in installation sites. A special closure system, equipped with a light emitter, verifies the connection continuity and the success of the splicing. The Kit code 2040150 is to be used for the connectors' termination.

View details →

Unicam ST single-mode connector for fibers 9/125 μm, Super PC polish

Pre-polished Unicam ST high performance single-mode 9/125 connector for an easy and quick termination of optical fibers without the use of resin or adhesive. The fiber to be used for the termination is spliced with the fiber already pre-installed and pre-polished into the connector by using a special gel which doesn't need any heating or electric power, thus granting a very high quality and minimizing the problems occurring within the harsh working conditions in installation sites. A special closure system, equipped with a light emitter, verifies the connection continuity and the success of the splicing. The Kit code 2040150 is to be used for the connectors' termination.

View details →

Unicam SC multimode connector for fibers 62.5/125 μm, high performance

Pre-polished Unicam SC high performance multimode 62, 5/125 OM1 connector for an easy and quick termination of optical fibers without the use of resin or adhesive. The fiber to be used for the termination is spliced with the fiber already pre-installed and pre-polished into the connector by using a special gel which doesn't need any heating or electric power, thus granting a very high quality and minimizing the problems occurring within the harsh working conditions in installation sites. A special closure system, equipped with a light emitter, verifies the connection continuity and the success of the splicing. The Kit code 2040150 is to be used for the connectors' termination.

View details →

Unicam SC multimode connector for fibers 50/125 μm, OM3/OM4, high performance

Pre-polished Unicam SC high performance multimode 50/125 OM3/OM4 connector for an easy and quick termination of optical fibers without the use of resin or adhesive. The fiber to be used for the termination is spliced with the fiber already pre-installed and pre-polished into the connector by using a special gel which doesn't need any heating or electric power, thus granting a very high quality and minimizing the problems occurring within the harsh working conditions in installation sites. A special closure system, equipped with a light emitter, verifies the connection continuity and the success of the splicing. The Kit code 2040150 is to be used for the connectors' termination.

View details →

Unicam SC multimode connector for fibers 50/125 μm, high performance

Pre-polished Unicam SC High performance multimode 50/125 OM2 connector for an easy and quick termination of optical fibers without the use of resin or adhesive. The fiber to be used for the termination is spliced with the fiber already pre-installed and pre-polished into the connector by using a special gel which doesn't need any heating or electric power, thus granting a very high quality and minimizing the problems occurring within the harsh working conditions in installation sites. A special closure system, equipped with a light emitter, verifies the connection continuity and the success of the splicing. The Kit code 2040150 is to be used for the connectors' termination.

View details →

Unicam SC single-mode connector for fibers 9/125 μm, ultra PC polish

Pre-polished Unicam SC high performance single-mode 9/125 OS2 connector for an easy and quick termination of optical fibers without the use of resin or adhesive. The fiber to be used for the termination is spliced with the fiber already pre-installed and pre-polished into the connector by using a special gel which doesn't need any heating or electric power, thus granting a very high quality and minimizing the problems occurring within the harsh working conditions in installation sites. A special closure system, equipped with a light emitter, verifies the connection continuity and the success of the splicing. The Kit code 2040150 is to be used for the connectors' termination.

View details →

Unicam LC multimode connector for fibers 50/125 μm, OM3/OM4, high performance

Pre-polished Unicam LC high performance multimode 50/125 OM3/OM4 connector for an easy and quick termination of optical fibers without the use of resin or adhesive. The fiber to be used for the termination is spliced with the fiber already pre-installed and pre-polished into the connector by using a special gel which doesn't need any heating or electric power, thus granting a very high quality and minimizing the problems occurring within the harsh working conditions in installation sites. A special closure system, equipped with a light emitter, verifies the connection continuity and the success of the splicing. The Kit code 2040150 is to be used for the connectors' termination.

View details →

Unicam LC multimode connector for fibers 50/125 μm, high performance

Pre-polished Unicam LC high performance multimode 50/125 OM2 connector for an easy and quick termination of optical fibers without the use of resin or adhesive. The fiber to be used for the termination is spliced with the fiber already pre-installed and pre-polished into the connector by using a special gel which doesn't need any heating or electric power, thus granting a very high quality and minimizing the problems occurring within the harsh working conditions in installation sites. A special closure system, equipped with a light emitter, verifies the connection continuity and the success of the splicing. The Kit code 2040150 is to be used for the connectors' termination.

View details →

Unicam LC single-mode connector for fibers 9/125 μm, ultra PC polish

Pre-polished Unicam LC high performance single-mode 9/125 OS2 connector for an easy and quick termination of optical fibers without the use of resin or adhesive. The fiber to be used for the termination is spliced with the fiber already pre-installed and pre-polished into the connector by using a special gel which doesn't need any heating or electric power, thus granting a very high quality and minimizing the problems occurring within the harsh working conditions in installation sites. A special closure system, equipped with a light emitter, verifies the connection continuity and the success of the splicing. The Kit code 2040150 is to be used for the connectors' termination.

View details →

Ready to start your next project?