Fiber, copper, active components, racks and enclosures from our exclusive vendor portfolio — engineered for enterprise networks.
NEXCONEC high fiber count splice closure is a dome type with large capacity, with vulcanized rubber as sealing component, helical and extrusion mechanical sealing. It is suitable for different methods of branch cable connection including the branch of uncut cable. Multi-application purpose with for aerial, pole-mounted, wall-mounted and buried application. The closure has very goods sealing performance, convenient to operate and wide range of applications
View details →
NEXCONEC Dome closure is the best designed and innovative solution for fiber cabling installation. It adopts fully IP68 mechanical sealing structure for good sealing performance of fiber cable over 48 fibers. It can be installed PLC Splitter up to 2x 2:32 with 36 SC Simplex Adapters ports. Multi-application and installations with Aerial, Pole Mounting and Wall Mounting.
View details →
NEXCONEC Dome closure is the best designed and innovative solution for fiber cabling installation. It adopts fully IP68 mechanical sealing structure for good sealing performance of fiber cable over 48 fibers. It can be installed PLC Splitter up to 2x 2:32 with 36 SC Simplex Adapters ports. Multi-application and installations with Aerial, Pole Mounting and Wall Mounting.
View details →
19"3 document holder sliding shelf made of painted steel sheet, mounting on 4 uprights, equipped with safety keys and suitable for the installation in cabinets with a depth of 600, 800 and 1000 mm.
View details →
19"3 drawer with varnished steel sheet structure, mounting on 4 uprights, with safety key and suitable for the installation in cabinets with a depth of 600, 800 and 1000 mm.
View details →
Dust cap for patch panel SC duplex port, black
View details →
Dust cap for patch panel SC simplex port, black
View details →
19" enclosure for DIN mounting devices.
View details →
4 unit DIN-rail guide, with increased depth and height and specific holes for the cables inlet. Suitable for the installation of equipments and accessories inside 19"3 racks.
View details →
Epoxy LC type glue-on connector for the termination of multimode optical fibers of Tight and Loose cables. This technology requires the use of epoxy glue Code 2007010 and the polishing of the inserted optical fiber. This type of adhesive glues the fiber into the ferrule of the connector very quickly, the fiber-end cut and polishing make the connector head surface fit for the contact with other connectors of the same type. To use this type of connectors it is necessary to buy the termination kit Code 2040050
View details →
Epoxy SC type glue-on connector for the termination of multimode optical fibers of Tight and Loose cables. This technology requires the use of epoxy glue Code 2007010 and the polishing of the inserted optical fiber. This type of adhesive glues the fiber into the ferrule of the connector very quickly, the fiber-end cut and polishing make the connector head surface fit for the contact with other connectors of the same type. To use this type of connectors it is necessary to buy the termination kit Code 2040050
View details →
ST type glue-on connector for the termination of multimode optical fibers with cold termination technique. It can be used for the termination of Tight and Loose optical fibers. With the cold termination system the connector is fixed to the fiber through the use of the glue kit code 2007010. The one-component glue reacts in a very short time by gluing the fiber to the ferrule and to the connector body. The subsequent cutting and lapping phase makes the surface of the head suitable for contact with other connectors of the same type. To use this type of connector, the termination kit with code 2040050 is required in addition to the glue kit.
View details →
Epoxy ST type glue-on connector for the termination of single-mode optical fibers of Tight and Loose cables. This technology requires the use of epoxy glue Code 2007010 and the polishing of the inserted optical fiber. This type of adhesive glues the fiber into the ferrule of the connector very quickly, the fiber-end cut and polishing make the connector head surface fit for the contact with other connectors of the same type. To use this type of connectors it is necessary to buy the termination kit Code 2040050
View details →
Ventilation units for air vent inside cabinets. The following options are available: 1 to 4-fan units, with or without thermostat, roof mounting with 0 U space take-up. The 1 to 2-fan versions are suitable for the Wall cabinets PRO Series### the 2 to 4-fan versions are suitable for Floor cabinets PRO/TECH Series and Datacenter cabinets PRO Series.
View details →
IP55 fans for allowing air vent inside wall mounted IP65 cabinets. Depending on its size, the fan has to be installed in a cabinet with a suitable depth.
View details →
IP55 fans for allowing air vent inside wall mounted IP65 cabinets. Depending on its size, the fan has to be installed in a cabinet with a suitable depth.
View details →
IP55 fans for allowing air vent inside wall mounted IP65 cabinets. Depending on its size, the fan has to be installed in a cabinet with a suitable depth.
View details →
NEXCONEC® Indoor buffer tube Fanout-Out Kits provide the ultimate solution for the field installation of connectors for the termination of 6 and 12 fiber buffer tubes. These kits provide the most compact, easy to install fan-out solution. The compact design requires no additional hardware than the required for termination tight-buffered cables. The 900Î1⁄4m fanout assembly is color coded to match the fiber color scheme.
View details →
NEXCONEC® Indoor buffer tube Fanout-Out Kits provide the ultimate solution for the field installation of connectors for the termination of 6 and 12 fiber buffer tubes. These kits provide the most compact, easy to install fan-out solution. The compact design requires no additional hardware than the required for termination tight-buffered cables. The 900Î1⁄4m fanout assembly is color coded to match the fiber color scheme.
View details →
Fan-out 12 FO which splits the optical fibers of loose cables. It has to be used with the heat-shrink tube, which is to be ordered separately and protects and reinforces the optical fibers inside optical patch panels and boxes.
View details →
Fan-out 24 FO which splits the optical fibers of loose cables. It has to be used with the heat-shrink tube, which is to be ordered separately and protects and reinforces the optical fibers inside optical patch panels and boxes.
View details →
Fan-out splitter kit for fibers separation of Loose fiber optic cables. The kit includes a furcation unit and coloured fan-out buffer tubes to terminate the inserted fiber with every kind of connectors. Version for up to 12 optical fibers.
View details →
Fan-out splitter kit for fibers separation of Loose fiber optic cables. The kit includes a furcation unit and coloured fan-out buffer tubes to terminate the inserted fiber with every kind of connectors. Version for up to 6 optical fibers.
View details →Let's build it together
Our engineers are one message away — from design and supply to installation, testing and handover.
