The Miller CFS-3 Fiber Optic Stripper, with 3-hole designed to precisely remove 1.6mm to 3mm fiber jacket, 600 to 900-micron buffer and 250-micron acrylate without scratching or nicking the fiber. Factory-set blade notches require no adjustment. A stripping guide on the handle is convenient for fast operation.
View details →
Nexconec high performance optical fiber cleaver is available with a single fiber adapter for 250 to 900 micron coated single fibers. It is a simple operation for the user to remove or install the single fiber adapter and alternate between mass and single fiber cleaving.
View details →
Nexconec connectors are manufactured using state-of-the-art ferrules and components. Available in SC, LC, FC and ST in both PC and APC in singlemode and multimode PC. The connector consists of a polymer body and a ceramic ferrule/spring/crimp barrel assembly in addition to a crimp-over sleeve and rubber boot. These connectors are suitable for 900Î1⁄4m, 2mm and 3mm cables.
View details →
NEXCONEC® Field Installable Connectors (FIC) are factory terminated and polished to make fiber terminations fast, easy and reliable. The fiber optic connectors offer terminations in less than 2 minutes without any difficulty and requires no epoxy, polishing or crimping. NEXCONEC® FIC greatly reduces the installation and setup time. It has a window feature to allow testing with a visual fault locator.
View details →
NEXCONEC high-performance attenuators are designed to give accurate attenuation over a wide range of wavelengths. The male-female plug type configuration can be used directly on the end of a patch cord, which in turn can insert directly into an adaptor. Available in FC, SC and LC connector styles with UPC or APC finish, attenuators providing ultra-low return loss and are available from 1dB to 30dB.
View details →
NEXCONEC Fiber Optic Adaptors are a range of high-quality adaptors which have high precision alignment sleeves for high reliability and better repeatability. The housing is available in different colours (for SC and LC only) and with options for flange or flangeless body and metal clips.
View details →
NEXCONEC SC Simplex Shutter Adaptor is designed for applications where laser safety and dust protection are important factors. It is suitable for FTTH and other telecom applications. It has a high precision zirconia alignment sleeve designed for high reliability and excellent repeatability in single mode networks.
View details →
NEXCONEC® IP68 ODVA optical fiber cable assemblies provide an environmental seal and mechanical protection for outdoor application. ODVA connectors are available in SC Simplex, LC Duplex or MTP/MPO. They provide quick installation solutions and have good performance on mating with ODVA receptacles.
View details →
NEXCONEC® IP67 rated ODVA Fiber Optic Cable Glands featuring SC, LC or MPO adapter types, offer exceptional performance and durability and designed to withstand extreme temperatures, moisture, and other environmental challenges.
View details →
Nexconec compact ODVA junction box allows users to transition from an ODVA MTP/MPO Base-12 to a standard 6 LC Duplex ports. The ODVA entry guarantees an easy, one-step connection system with the combined push-pull insertion and bayonet-style mechanical latch.
View details →
Nexconec compact ODVA Din Rail MPO-MPO junction box allows users to transition from an ODVA Base-12 or Base-24 MTP/MPO to another ODVA MTP/MPO ports to extend the link. ODVA box gives IP20 protection, where the ODVA connector gives IP68 protection. The ODVA entry guarantees an easy, one-step connection system with the combined push-pull insertion and bayonet-style mechanical latch.
View details →
The ODVA Waterproof box is a fast connect closure that is sealed mechanically. It is single ended design and is generally used on the cable distribution section. The closure provides a quick and reliable cable connection function in FTTH scenarios. It supports 6 pcs fast connect drop cables.
View details →
NEXCONEC MTP/MPO QSFP Fanouts are small form factor high density fiber connector assemblies that breakout into discrete single ferrule connectors. Our MTP/MPO Fanouts are specifically designed for QSFP 40G to 10G transition application to connect between equipment or to interconnect modules/panels in a data center.
View details →
NEXCONEC MTP/MPO Fanouts are small form factor high-density fiber connector assemblies that breakout into discrete single ferrule connectors. Our MTP/MPO Fanouts are suitable for up to 100G applications to connect between equipment or to interconnect modules/panels in a data center. The fanouts also can be used for transitions between high to low bandwidth equipment.
View details →
NEXCONEC MTP/MPO Fanouts are small form factor high-density fiber connector assemblies that breakout into discrete single ferrule connectors. Our MTP/MPO Fanouts are suitable for up to 100G applications to connect between equipment or to interconnect modules/panels in a data center. The fanouts also can be used for transitions between high to low bandwidth equipment.
View details →
NEXCONEC MTP/MPO Fanouts are small form factor high-density fiber connector assemblies that breakout into discrete single ferrule connectors. Our MTP/MPO Fanouts are suitable for up to 100G applications to connect between equipment or to interconnect modules/panels in a data center. The fanouts also can be used for transitions between high to low bandwidth equipment.
View details →
NEXCONEC® MTP®/MPO Slim Trunks are small form factor high-density fiber connector assemblies used in high-density applications. Our MTP®/MPO Slim Trunks are suitable for up to 100G applications to connect between equipment or to interconnect modules/panels in a data center. The MTP®/MPO connectors are available in Standard, Elite and Super Low Loss versions to cater customer's power budget requirements.
View details →
NEXCONEC MTP/MPO Trunks are small form factor high-density fiber connector assemblies used in high-density applications. Our MTP/MPO Trunks are specifically designed for 40G & 100G applications to connect between equipment or to interconnect modules/panels in a data center. The Trunks are available in Micro cable double jacket and flat cable options suitable for pulling on trays. The MTP/MPO connectors are available in Standard and Elite versions to cater customer's power budget requirements.
View details →
NEXCONEC MTP/MPO Trunks are small form factor high-density fiber connector assemblies used in high-density applications. Our MTP/MPO Trunks are suitable for up to 100G applications to connect between equipment or to interconnect modules/panels in a data center. The MTP/MPO connectors are available in Standard and Elite versions to cater customer's power budget requirements.
View details →
NEXCONEC MTP®/MPO 1x 16 fiber ferrule cable assemblies are designed for cable infrastructures which are currently used for, or which are due to be upgraded to, parallel optics 40/100G protocols such as 100G BASE-SR10 or 40G BASE-SR4. The Assemblies are built using 1x 16 fiber ferrule interface, MTP®/MPO connectors, which can be used directly with 100G transceivers or, when used together with transition modules/cables, can provide 40/100G parallel transceivers or legacy non-parallel optics 4/8/10/16G Ethernet/ fiber channel protocol networks.
View details →
NEXCONEC MTP®/MPO 24 fiber ferrule cable assemblies are designed for cable infrastructures which are currently used for, or which are due to be upgraded to, parallel optics 40/100G protocols such as 100G BASE-SR10 or 40G BASE-SR4. The Assemblies are built using 24 fiber ferrule interface, MTP®/MPO connectors, which can be used directly with CFP/CXP 100G transceivers or, when used together with transition modules/cables, can provide 40/100G parallel transceivers or legacy non-parallel optics 4/8/10/16G Ethernet/ fiber channel protocol networks.
View details →
NEXCONEC Outdoor MTP/MPO Trunks are small form factor high-density fiber connector assemblies used in high-density applications. Our MTP/MPO Trunks are suitable for up to 100G applications to connect between equipment's or to interconnect modules/panels in a data center. The MTP/MPO connectors are available in Standard and Elite versions to cater customer's power budget requirements
View details →
NEXCONEC Indoor & Outdoor MTP/MPO Trunks are made with micro cable with flex armored tube which contains 12 fibers of 250Î1⁄4m fibers. With water blocking yarn and E-glass added in the cable, this is ideal product used in the indoor/outdoor high-density applications. The MTP/MPO connectors are available in Standard and Elite versions to cater customer's power budget requirements.
View details →
The NEXCONEC® MTP®/MPO Trunks are compact, high-density fiber connector assemblies designed for use in high-density environments. These trunks are ideal for connecting equipment or interconnecting modules/panels in data center applications up to 100G. Our MTP®/MPO connectors come in both Standard and Elite versions to accommodate the varying power budget needs of our customers.
View details →Let's build it together
Our engineers are one message away — from design and supply to installation, testing and handover.
