NEXCONEC Compact Dome Enclosure is the best designed and innovative solution for fiber cabling installation. It only requires its silicone rubber sealing gasket to ensure the good sealing performance of fiber cable, up to 96fibers of fiber count. The different sizes of cable entrances provide the great flexibility for cables installation.
View details →
NEXCONEC high fiber count splice closure is a dome type with large capacity, with vulcanized rubber as sealing component, helical and extrusion mechanical sealing. It is suitable for different methods of branch cable connection including the branch of uncut cable. Multi-application purpose with for aerial, pole-mounted, wall-mounted and buried application. The closure has very goods sealing performance, convenient to operate and wide range of applications
View details →
NEXCONEC Dome closure is the best designed and innovative solution for fiber cabling installation. It adopts fully IP68 mechanical sealing structure for good sealing performance of fiber cable over 48 fibers. It can be installed PLC Splitter up to 2x 2:32 with 36 SC Simplex Adapters ports. Multi-application and installations with Aerial, Pole Mounting and Wall Mounting.
View details →
Nexconec 1U fiber cable storage sliding panel, mounted on 19" network racks. This slide-out tray fiber cable storage patch panel could make your fiber cable management neat and professional in the telecommunication room, data centers to storage excess fibers and cables.
View details →
The NEXCONEC® 1U Retrofit Front Manager is a comprehensive accessory add-on solution meticulously designed for efficient cable management. This universal 19" front manager seamlessly fits with all 1U fixed frames or sliding panels and mounts in the same unit space without consuming extra rack space. Intelligently functioning as an integral component in streamlining and organizing cables.
View details →
Nexconec's fibre splice tray is designed to safely splice 12 or 24 individual fibers which can be installed in rack mount patch panels, wall mount enclosures, terminal box or distribution unit. The stackable fiber cassettes provide security for fusion splicing and can be used with different cable options. The tray incorporates clamps to secure loose tubes and pigtails on entry and exit.
View details →
Nexconec's fiber cable management ring manages fiber slack in all different type of rack and wall mount enclosures. Fiber retention tabs maintain minimum bend radius control, while rounded edges eliminate the risk of snagging and stress.
View details →
Nexconec splice tray is designed to splice 12 individual fibers which can be installed in rack mount patch panels, all mount enclosures, terminal box or distribution unit. The splice trays provide security for fusion splicing and can be used with different cable options. The splice tray is supplied with rigid plastic cover to protect the splice and fibers.
View details →
Nexconec Transition Breakout Box solution is designed for enhanced cable management that helps to organize the incoming cable into separate conduits which will connect to the NGX or LGX splice modules or any other splicing unit. The breakout box is designed to support up to 144Fo.
View details →
NEXCONEC® Large Fiber Transition Breakout Box solution is designed for enhanced cable management that helps to organize the incoming cable into separate conduits which will connect to the NGX or LGX splice modules or any other splicing unit. The breakout box is designed to support up to 576FO (Up to 24 mini flex tubes of 5mm).
View details →
NEXCONEC® Mini Transition Breakout Box solution is designed for enhanced cable management that helps to organize the incoming cable into separate conduits which will connect to the NGX or LGX splice modules or any other splicing unit. The breakout box is designed to support up to 4 Corrugated tubes.
View details →
Nexconec fiber management guide are designed to route and protect the bending radius of the patch cords.
View details →
Reducer bracket allows rack mount equipment designed for 19" (483 mm) equipment to be properly installed into 21" racks.
View details →
Nexconec mini overhead brackets are designed to mount in overhead rails. This accessory helps to create extra space within datacenter to install patch panels without a cabinet. Special screws mounting provides quick and easy installation.
View details →
Nexconec splice protector sleeve is specifically made to accommodate the bare fibers when fusion splicing. The different lengths of splice protectors offer the flexibility to fiber optic network installers to adapt the variant of splice trays, splice holders and in designing optical modules.
View details →
NEXCONEC® 1U and 2U 19'' blanking plate is specifically designed for mounting on the cabinets for the redundant space which will make the whole installation tidy and neat.
View details →
Nexconec 19" snap-in Blanking Plate (Panel) provide easy tool-less installation and ensure proper airflow to equipment. Used to cover unused rack space in cabinets or open frame racks for a finished appearance. Can also be used for surface mounting small devices. Blanking Plates are flat with mounting slots spaced at 19"(inches).
View details →
The NEXCONEC® 1U Cable Manager Bar with 4 metal hooks is specifically crafted to fit 19" rack spaces. It efficiently organizes cables ranging from small to large bundles, ensuring a tidy arrangement and allows easy cable management for both left and right cable routings. This innovative cable management bar serves as an optimal solution for supporting patch cords in a 19" rack while also mitigating air flow loss within the racking system.
View details →
Nexconec 1U Cable Bar with 5 plastic hooks is designed for 19-inch rack space. The cable bar provides a neat and simple means of organizing cables from small to large bundles. It's offers quick and easy installation. The bar has 5 plastic hooks on the front to manage cables for left or right cable routings.
View details →
Nexconec 1U Cable Bar with brush and 5 plastic hooks is designed for 19-inch rack space. The cable bar provides a neat and simple means of organizing cables from small to large bundles. It's offers quick and easy installation. The bar has 4 slots of brushes and 5 plastic hooks on the front to manage cables for left or right cable routings.
View details →
Nexconec Plastic Cable Bar is designed for 19-inch rack space. The cable bar provides a neat and simple means of organizing cables from small to large bundles. It's offers quick and easy installation. The bar has 12 slots on the top and bottom to manage cables for top and below with additional slots on the back to manage cables for back entry.
View details →
Nexconec horizontal 1U and 2U cable organizer with brush strip promote proper airflow while allowing cables to be passed from the rear of the rack.
View details →
Nexconec horizontal 1U and 2U cable organizer with brush strip promote proper airflow while allowing cables to be passed from the rear of the rack.
View details →
NEXCONEC® 1U/2U Dual-sided plastic cable manager rail is designed for 19-inch rack space. It has 24 slots on the top and bottom to manage cable within a rack or cabinet from the front and back with unique fingers designed to protect cables from damage.
View details →Let's build it together
Our engineers are one message away — from design and supply to installation, testing and handover.
