Shop

1U 12 PORTS SC FIBER PANEL & SHELVE - PPST2

The NEXCONEC® 1U 12 ports SC optical fiber panel & shelve is a 19" (inches) standard mounting type metal rack, uniquely built to contain two separate compartments. 1. Optical Compartment: It comes with an optical area equipped with 6x SC duplex adapter ports & a splice tray for the storage and splicing of 12 fibers. 2. Electro-optical Compartment: The maximum size of (W)305.60mm x (D) 260mm area has capacities to accommodate and provide support for an electro-optical media converter (not included). This fiber cable storage panel is ideal to use in the telecommunication room, data centers to store excess fibers and cables. It could make your fiber cable management neat and professional.

View details →

1U 12 PORTS SC FIBER PANEL & SHELVE - PPST2

The NEXCONEC® 1U 12 ports SC optical fiber panel & shelve is a 19" (inches) standard mounting type metal rack, uniquely built to contain two separate compartments.

View details →

1U 144FO TRANSITION QSFP 40G TO SFP 10G BASE-8 BREAKOUT PANEL - QPF144xx

NEXCONEC® High Density 144 Fibers 1U Breakout Fiber Patch Panel is designed to connect 40G QSFP ports with MTP®/MPO fiber cables, mapping to the back of the panel, then breaking out as 72x 10G on the front panel with LC fiber cables. The panel provides MPO and LC Premium terminations with remarkable low insertion losses, ensuring exceptional performance for high-speed networks with stringent low power budgets. All breakout panels meet the requirements of TIA/EIA, IEC standards.

View details →

1U 16 PORTS UTP/STP UNLOADED PATCH PANEL - CMX1SUN-16

NEXCONEC 1U 16 ports unloaded shielded keystone patch panel allows flexibility for the users during installations. It gives you the benefits of only using ports required by installing the desired number of jacks into the frame.

View details →

1U 19" BRUSH STRIP BAR - FCM06

Nexconec horizontal 1U and 2U cable organizer with brush strip promote proper airflow while allowing cables to be passed from the rear of the rack.

View details →

1U 19" BRUSH STRIP BAR - FCM06

Nexconec horizontal 1U and 2U cable organizer with brush strip promote proper airflow while allowing cables to be passed from the rear of the rack.

View details →

1U 19" BRUSH STRIP BAR - FCM06

Nexconec horizontal 1U and 2U cable organizer with brush strip promote proper airflow while allowing cables to be passed from the rear of the rack.

View details →

1U 19"3 SNAP-IN BLANKING PLATE PLASTIC - FCM00

NEXCONEC® 19" snap-in Blanking Plate (Panel) provide easy tool-less installation and ensure proper airflow to equipment. Used to cover unused rack space in cabinets or open frame racks for a finished appearance. Can also be used for surface mounting small devices. Blanking Plates are flat with mounting slots spaced at 19"(inches). This rack filler plastic plate is 1U in height. It clips directly into square hole rail cutouts and does not require cage nuts or screws to install. It is used to fill empty rack space to prevent air re-circulation and improve cooling.

View details →

1U 19"3 SNAP-IN BLANKING PLATE PLASTIC - FCM00

Nexconec 19" snap-in Blanking Plate (Panel) provide easy tool-less installation and ensure proper airflow to equipment. Used to cover unused rack space in cabinets or open frame racks for a finished appearance. Can also be used for surface mounting small devices. Blanking Plates are flat with mounting slots spaced at 19"(inches).

View details →

1U 19"3 SNAP-IN BLANKING PLATE PLASTIC - FCM00

Nexconec 19" snap-in Blanking Plate (Panel) provide easy tool-less installation and ensure proper airflow to equipment. Used to cover unused rack space in cabinets or open frame racks for a finished appearance. Can also be used for surface mounting small devices. Blanking Plates are flat with mounting slots spaced at 19"(inches).

View details →

1U 24 PORTS FC/ST SLIDING PATCH PANEL - SPP24F

Nexconec sliding patch panel accepts 24 adapters FC or ST within 1U space. The panel can be pre-loaded completely with the required adapters or pre-loaded with pigtails and splice accessories. The tray is locked by 2 plastic latches and lowers to a 45deg angle when fully extended. Installation and labelling are simple and easy.

View details →

1U 24 PORTS FC/ST SLIDING PATCH PANEL - SPP24F

Nexconec sliding patch panel accepts 24 adapters FC or ST within 1U space. The panel can be pre-loaded completely with the required adapters or pre-loaded with pigtails and splice accessories. The tray is locked by 2 plastic latches and lowers to a 45deg angle when fully extended. Installation and labelling are simple and easy.

View details →

1U 24 PORTS FC SX/ST SX SLIDING PATCH PANEL - MP2PP03

NEXCONEC® 1U Sliding Patch Panel accepts 24 adapters FC Simplex/ST Simplex within 1U space (Up to 24FO). The panel can be pre-loaded completely with the required adapter plates and pigtails.

View details →

1U 24 PORTS SC DX/LC QD SLIDING PATCH PANEL - MP2PP02

NEXCONEC® 1U Sliding Patch Panel accepts 24 adapters SC Duplex/LC Quad within 1U space (Up to 96FO in LC). The panel can be pre-loaded completely with the required adapter plates and pigtails.

View details →

1U 24 PORTS SC DX / LC QD SLIDING PATCH PANEL - SPP24D

Nexconec sliding patch panel accepts 24 adapters SC Duplex or LC Quad within 1U space. The panel can be pre-loaded completely with the required adapters or pre-loaded with pigtails and splice accessories. The tray is locked by 2 plastic latches and lowers to a 45deg angle when fully extended. Installation and labelling are simple and easy.

View details →

1U 24 PORTS SC DX/LC QD SLIDING PATCH PANEL - SPP24D

Nexconec sliding patch panel accepts 24 adapters SC Duplex or LC Quad within 1U space. The panel can be pre-loaded completely with the required adapters or pre-loaded with pigtails and splice accessories. The tray is locked by 2 plastic latches and lowers to a 45deg angle when fully extended. Installation and labelling are simple and easy.

View details →

1U 24 PORTS SC DX/LC QD SLIDING PATCH PANEL - SPP24D

Nexconec sliding patch panel accepts 24 adapters SC Duplex or LC Quad within 1U space. The panel can be pre-loaded completely with the required adapters or pre-loaded with pigtails and splice accessories. The tray is locked by 2 plastic latches and lowers to a 45deg angle when fully extended. Installation and labelling are simple and easy.

View details →

1U 24 PORTS SC SX/LC DX SLIDING PATCH PANEL - MP2PP01

NEXCONEC® 1U Sliding Patch Panel accepts 24 adapters SC Simplex/LC Duplex within 1U space (Up to 48FO in LC). The panel can be pre-loaded completely with the required adapter plates and pigtails.

View details →

1U 24 PORTS SC SX / LC DX SLIDING PATCH PANEL - SPP24S

Nexconec sliding patch panel accepts 24 adapters SC Simplex or LC Duplex within 1U space. The panel can be pre-loaded completely with the required adapters or pre-loaded with pigtails and splice accessories. The tray is locked by 2 plastic latches and lowers to a 45deg angle when fully extended. Installation and labelling are simple and easy.

View details →

1U 24 PORTS SC SX/LC DX SLIDING PATCH PANEL - SPP24S

Nexconec sliding patch panel accepts 24 adapters SC Simplex or LC Duplex within 1U space. The panel can be pre-loaded completely with the required adapters or pre-loaded with pigtails and splice accessories. The tray is locked by 2 plastic latches and lowers to a 45deg angle when fully extended. Installation and labelling are simple and easy.

View details →

1U 24 PORTS SC SX/LC DX SLIDING PATCH PANEL - SPP24S

Nexconec sliding patch panel accepts 24 adapters SC Simplex or LC Duplex within 1U space. The panel can be pre-loaded completely with the required adapters or pre-loaded with pigtails and splice accessories. The tray is locked by 2 plastic latches and lowers to a 45deg angle when fully extended. Installation and labelling are simple and easy.

View details →

1U 24 PORTS STP UNLOADED PATCH PANEL - CMX1SUN

NEXCONEC 1U 24 ports unloaded shielded keystone patch panel allows flexibility for the users during installations. It gives you the benefits of only using ports required by installing the desired number of jacks into the frame.

View details →

1U 24PORTS FC-ST SLIDING PANEL - SPP24F

Nexconec sliding patch panel accepts 24 adapters FC or ST within 1U space. The panel can be pre-loaded completely with the required adapters or pre-loaded with pigtails and splice accessories. The tray is locked by 2 plastic latches and lowers to a 45deg angle when fully extended. Installation and labelling are simple and easy.

View details →

1U/2U 19" BLANK METAL PLATE - PLxx

NEXCONEC® 1U and 2U 19'' blanking plate is specifically designed for mounting on the cabinets for the redundant space which will make the whole installation tidy and neat.

View details →

Ready to start your next project?