CABINET FLOOR STANDING
NEXCONEC® 19" floor standing cabinets are high quality, competitive cabinets that offer real value for money in today's market.
View details →
LGX ZERO RU BRACKET - MP3BK01
The Zero RU Bracket adds an additional patch panel location to free up extra space in the cabinet. The bracket installs vertically in the cabinet rail and creates a convenient point for distribution of patch cables within the vertical racking system. The Zero RU bracket accepts any Nexconec LGX modules and plates. The Bracket is supplied unloaded and the modules and plates are supplied separately.
View details →
ONE CLICK CLEANER 2.5 MM - TCOC01
NEXCONEC one click cleaners are mechanical cleaning tools designed to clean fiber optic connectors residing in an adapter or faceplate and unmated connectors. The NEXCONEC one click cleaners use a novel dry cleaning strand to gently sweep and lift away dust and residues from the connector end face.
View details →
ONE CLICK CLEANER 1.25 MM - TCOC02
NEXCONEC one click cleaners are mechanical cleaning tools designed to clean fiber optic connectors residing in an adapter or faceplate and unmated connectors. The NEXCONEC one click cleaners use a novel dry cleaning strand to gently sweep and lift away dust and residues from the connector end face.
View details →
ONE CLICK MPO CLEANER - TCOC03
NEXCONEC One-Click Cleaner MPO is a high-performance device designed for cleaning the ferrule end faces of MTP/MPO connectors. This tool cleans the fiber end face without the use of alcohol, cleaning all 12 fibers at once.
View details →
CASSETTE CLEANER - TCCS01
NEXCONEC cassette type cleaners are mechanical cleaning tools designed to clean fiber optic connectors, which are made with either 2.5mm or 1.25mm ceramic ferrule. The NEXCONEC cassette type cleaners use a dry cleaning strand to gently sweep and lift away dust.
View details →
CASSETTE CLEANER MT FERRULES - TCCS02
NEXCONEC cassette type cleaners are mechanical cleaning tools designed to clean fiber optic connectors which are MT ferrules, cleans connectors MTP/MPO flat and angled with guide pins and no pins. The NEXCONEC cassette type cleaners use a dry cleaning strand to gently sweep and lift away dust.
View details →
VFL - TSVFL5M
The fiber visual fault locator VFL-MINI provides efficient visible light at low cost to identify the fiber break points, fiber cracking splicing and bending as a necessary checking tools to the tools sets. It checks out the OTDR dead zone working as complimentary for the OTDR or only helps to identify the fibers in optical network during or after its installation or splicing.
View details →
DEAD ZONE ELIMINATOR
The NEXCONEC® Dead Zone Eliminator establishes a connection with the OTDR and the link that is being tested, with the aim of evaluating the link's attenuation and the reflectance of the connection at the near end. This dead zone is provided in a robust, compact plastic casing, ideal for use in a rugged environment.
View details →
HANDHELD POWER METER - NXOPM101A-L
NEXCONEC handheld power meter is a full-function optical power meter, it aims at fiber network installation, fiber network engineering acceptance and fiber network maintenance. Combined usage with NXOLS201A optical light source, it offers a quick and accurate testing solution on both SM and MM fibers.
View details →
HANDHELD LIGHT SOURCE - NXOLS201A
NEXCONEC handheld light source is designed to match NXOPM101A, it not only can provide stable out power, but also it combined usage with NXOPM101A, they can realize automatic wavelength identification and automatic frequency identification. Also the NXOLS201A has features of good appearance, good touch feeling and considerate humanization design.
View details →
PORTABLE FIBER ENDFACE INSPECTOR
NEXCONEC Portable Inspection Microscope is the upgraded version, which provides network installer with high performance fiber inspection solutions. The whole set includes a digital probe, the monitor with the capability to inspect/record/file the data of fiber end face from assorted connectors.
View details →
OPTICAL FIBER IDENTIFIER - NXOFI
NEXCONEC Optical Fiber Identifier can quickly identify the direction of transmitted fiber and display the relative core power without interrupting the current service. The fiber identifier recognizes modulation like, 270Hz, 1KHz and 2KHz with continuous audible tone. There are four adapter heads available: à ̃0.25, à ̃0.9, à ̃2.0 and à ̃3.0. This OFI is powered by 2 pcs very normal AAA batteries.
View details →
MILLER FIBER CABLE STRIPPER - CFS-3
The Miller CFS-3 Fiber Optic Stripper, with 3-hole designed to precisely remove 1.6mm to 3mm fiber jacket, 600 to 900-micron buffer and 250-micron acrylate without scratching or nicking the fiber. Factory-set blade notches require no adjustment. A stripping guide on the handle is convenient for fast operation.
View details →
HIGH PERFORMANCE OPTICAL FIBER CLEAVER - CLEAV01
Nexconec high performance optical fiber cleaver is available with a single fiber adapter for 250 to 900 micron coated single fibers. It is a simple operation for the user to remove or install the single fiber adapter and alternate between mass and single fiber cleaving.
View details →
FIBER CONNECTORS
Nexconec connectors are manufactured using state-of-the-art ferrules and components. Available in SC, LC, FC and ST in both PC and APC in singlemode and multimode PC. The connector consists of a polymer body and a ceramic ferrule/spring/crimp barrel assembly in addition to a crimp-over sleeve and rubber boot. These connectors are suitable for 900Î1⁄4m, 2mm and 3mm cables.
View details →
FIELD INSTALLABLE CONNECTORS FIC - ACFICxx-xx
NEXCONEC® Field Installable Connectors (FIC) are factory terminated and polished to make fiber terminations fast, easy and reliable. The fiber optic connectors offer terminations in less than 2 minutes without any difficulty and requires no epoxy, polishing or crimping. NEXCONEC® FIC greatly reduces the installation and setup time. It has a window feature to allow testing with a visual fault locator.
View details →
FIBER ATTENUATOR
NEXCONEC high-performance attenuators are designed to give accurate attenuation over a wide range of wavelengths. The male-female plug type configuration can be used directly on the end of a patch cord, which in turn can insert directly into an adaptor. Available in FC, SC and LC connector styles with UPC or APC finish, attenuators providing ultra-low return loss and are available from 1dB to 30dB.
View details →
FIBER OPTIC ADAPTER
NEXCONEC Fiber Optic Adaptors are a range of high-quality adaptors which have high precision alignment sleeves for high reliability and better repeatability. The housing is available in different colours (for SC and LC only) and with options for flange or flangeless body and metal clips.
View details →
SC EXTERNAL SHUTTER ADAPTER
NEXCONEC SC Simplex Shutter Adaptor is designed for applications where laser safety and dust protection are important factors. It is suitable for FTTH and other telecom applications. It has a high precision zirconia alignment sleeve designed for high reliability and excellent repeatability in single mode networks.
View details →
ODVA OUTDOOR FIBER OPTIC ASSEMBLIES - ODVA-xx
NEXCONEC® IP68 ODVA optical fiber cable assemblies provide an environmental seal and mechanical protection for outdoor application. ODVA connectors are available in SC Simplex, LC Duplex or MTP/MPO. They provide quick installation solutions and have good performance on mating with ODVA receptacles.
View details →
ODVA FIBER OPTIC CABLE GLANDS - ODVA-Adxx
NEXCONEC® IP67 rated ODVA Fiber Optic Cable Glands featuring SC, LC or MPO adapter types, offer exceptional performance and durability and designed to withstand extreme temperatures, moisture, and other environmental challenges.
View details →
ODVA MPO-LC BOX 12F - ODVA-B01
Nexconec compact ODVA junction box allows users to transition from an ODVA MTP/MPO Base-12 to a standard 6 LC Duplex ports. The ODVA entry guarantees an easy, one-step connection system with the combined push-pull insertion and bayonet-style mechanical latch.
View details →
ODVA MPO-MPO BOX (UP TO 24F) - ODVA-Bxx
Nexconec compact ODVA Din Rail MPO-MPO junction box allows users to transition from an ODVA Base-12 or Base-24 MTP/MPO to another ODVA MTP/MPO ports to extend the link. ODVA box gives IP20 protection, where the ODVA connector gives IP68 protection. The ODVA entry guarantees an easy, one-step connection system with the combined push-pull insertion and bayonet-style mechanical latch.
View details →Let's build it together
Ready to start your next project?
Our engineers are one message away — from design and supply to installation, testing and handover.