The SN® Fiber Optic Patch Cords is the ultimate designed and optimized for next-generation data rates, the SN® patch cord offers network operators the chance to densify their existing legacy infrastructure whilst at the same time providing an upgrade path to 400G and beyond. It is suitable for termination to either 1.6 mm or 2.0 mm round cable that incorporates a ruggedized jacket and internal strain relief.
View details →
NEXCONEC® Master Reference are ideal for high precision and high-performance optical test applications. The test leads are terminated with the highest quality physical contact (singlemode) zirconia ferrule connectors. The connectors are manufactured with precision mounting and polishing techniques which ensure excellent mating characteristics and optimised optical performance.
View details →
NEXCONEC® Flat Twin Duplex Patch Cord provide a more robust alternative to standard zipped duplex patch cables and provides good protection against kinking and crushing, two of the most common issues faced when installing cables. In spite of the additional durability, the cable is still flexible and very compact.
View details →
NEXCONEC® Armored Patch Cords are suitable for harsh environmental conditions without the need for additional protection. They are typically used in industrial environments, outdoor to indoor telecommunication networks, FTTx, FTTH and some critical applications. The patch cords provide sturdy interconnectivity to active equipment, passive optical devices and cross-connects. Armoured patch cords come double armoured with steel tape for better crush resistance and steel mesh for better tensile strength. Through this they have a high durability and a good crush resistance to ensure a longer life.
View details →
NEXCONEC® Mode Conditioning Patch Cord is used for Gigabit Ethernet applications where Gigabit routers and switches are installed into existing multimode cable units. These patch cords mainly prevent the differential mode delay, by setting the launch from the single-mode to be offset from the center of the multimode fiber.
View details →
NEXCONEC® pigtails are suitable for telecommunication networks, data processing networks, FTTx, FTTH and some critical applications. The pigtails provide flexible connection inside passive equipments, patch panels, ODFs and closures. We offers diverse range of single fiber ferrule connectors which are manufactured with precision factory mounting and polishing techniques to assure high transmission quality.
View details →
NEXCONEC® fanout cable assembly consists of multiple fiber connectors terminated on ribbon fiber or cable on one end and single fiber connectors terminated on 900Î1⁄4m tubing on the other. A Fan-Out is used to facilitate the conversion from the ribbon to individual fiber format. Used in fiber distribution panels and interconnect modules these ribbon pigtails are suitable for mass fusion splicing. These Fanouts eliminate tedious individual fiber splicing and connectorization. This unique solution reduces installation time and cost budgets.
View details →
NEXCONEC® Indoor Preterms offers quick and cost-effective installation within an indoor environment or intrabuilding premises. We manufacture preterm with superior fiber/cable performance, high quality connectors which offers improved link loss budgets. Micro core cables constructed of up to 144 fibers, 900Î1⁄4m or 2mm simplex cables coated with single or double jackets and aramid strength members. Available in different grade of CPR certified cables.
View details →
These NEXCONEC® Indoor/Outdoor Preterms are made of Microcore Flex Armored cable, contains 12 of 250Î1⁄4m optical fibers in a micro tube, accommodated in the helical flex armored tube and surrounded by E-glass, Kevlar, water blocking yarn and UV resistant LSZH outer jacket.
View details →
NEXCONEC® Indoor, Indoor/Outdoor Preterm offers quick and cost-effective installation within an indoor environment or intrabuilding premises. The preterm is made of Tight Buffer are best suited for application to load enclosures with 900Î1⁄4m tails. We manufacture preterm with superior fiber/cable performance, high quality connectors which offer improved link loss budgets.
View details →
NEXCONEC® Indoor/Outdoor Preterms offers quick and cost-effective installation for interbuilding, LAN or Campus wide network. The indoor/outdoor preterms are available in Loose Tube and Tight Buffer cable options with special designed modules to breakout individual fibers.
View details →
NEXCONEC® Indoor/Outdoor Preterms offers quick and cost-effective installation for interbuilding, LAN or Campus wide network. These indoor/outdoor preterms are made of single gel filled PBT tubes and each tube consists of 12 or 24, 250Î1⁄4m optical fibers, the tubes are surrounded with longitudinally applied E-glass non-metallic strength members, Corrugated Steel Tube (CST) armor and UV resistant LSZH or PE jacket.
View details →
The NEXCONEC® Outdoor Flex Armored Preterms are made of single loose tube, which consists of 12 (250Î1⁄4m) optical fibers, aramid strength member in the steel armored helical tube and surrounded with metal braiding, Kevlar and PU outer jacket for high crush resistance in the outdoor applications.
View details →
NEXCONEC® FTTA CPRI (Common Public Radio Interface) fiber cable assemblies available in 2 cores which can carry control or message signals with minimum loss. This Indoor/Outdoor FTTA (fiber to the Antenna) fiber patch cord is designed for the quick and iterative distributing & retrieving under harsh environment.
View details →
Nexconec Tactical field deployable cable reels offer a convenient method for roll-out and retrieval of fiber optic cable assemblies as well as a range of communications cabling.
View details →
NEXCONEC MTP/MPO QSFP Fanouts are small form factor high density fiber connector assemblies that breakout into discrete single ferrule connectors. Our MTP/MPO Fanouts are specifically designed for QSFP 40G to 10G transition application to connect between equipment or to interconnect modules/panels in a data center.
View details →
NEXCONEC MTP/MPO Fanouts are small form factor high-density fiber connector assemblies that breakout into discrete single ferrule connectors. Our MTP/MPO Fanouts are suitable for up to 100G applications to connect between equipment or to interconnect modules/panels in a data center. The fanouts also can be used for transitions between high to low bandwidth equipment.
View details →
NEXCONEC MTP/MPO Fanouts are small form factor high-density fiber connector assemblies that breakout into discrete single ferrule connectors. Our MTP/MPO Fanouts are suitable for up to 100G applications to connect between equipment or to interconnect modules/panels in a data center. The fanouts also can be used for transitions between high to low bandwidth equipment.
View details →
NEXCONEC MTP/MPO Fanouts are small form factor high-density fiber connector assemblies that breakout into discrete single ferrule connectors. Our MTP/MPO Fanouts are suitable for up to 100G applications to connect between equipment or to interconnect modules/panels in a data center. The fanouts also can be used for transitions between high to low bandwidth equipment.
View details →
NEXCONEC® MTP®/MPO Slim Trunks are small form factor high-density fiber connector assemblies used in high-density applications. Our MTP®/MPO Slim Trunks are suitable for up to 100G applications to connect between equipment or to interconnect modules/panels in a data center. The MTP®/MPO connectors are available in Standard, Elite and Super Low Loss versions to cater customer's power budget requirements.
View details →
NEXCONEC MTP/MPO Trunks are small form factor high-density fiber connector assemblies used in high-density applications. Our MTP/MPO Trunks are specifically designed for 40G & 100G applications to connect between equipment or to interconnect modules/panels in a data center. The Trunks are available in Micro cable double jacket and flat cable options suitable for pulling on trays. The MTP/MPO connectors are available in Standard and Elite versions to cater customer's power budget requirements.
View details →
NEXCONEC MTP/MPO Trunks are small form factor high-density fiber connector assemblies used in high-density applications. Our MTP/MPO Trunks are suitable for up to 100G applications to connect between equipment or to interconnect modules/panels in a data center. The MTP/MPO connectors are available in Standard and Elite versions to cater customer's power budget requirements.
View details →
NEXCONEC MTP®/MPO 1x 16 fiber ferrule cable assemblies are designed for cable infrastructures which are currently used for, or which are due to be upgraded to, parallel optics 40/100G protocols such as 100G BASE-SR10 or 40G BASE-SR4. The Assemblies are built using 1x 16 fiber ferrule interface, MTP®/MPO connectors, which can be used directly with 100G transceivers or, when used together with transition modules/cables, can provide 40/100G parallel transceivers or legacy non-parallel optics 4/8/10/16G Ethernet/ fiber channel protocol networks.
View details →
NEXCONEC MTP®/MPO 24 fiber ferrule cable assemblies are designed for cable infrastructures which are currently used for, or which are due to be upgraded to, parallel optics 40/100G protocols such as 100G BASE-SR10 or 40G BASE-SR4. The Assemblies are built using 24 fiber ferrule interface, MTP®/MPO connectors, which can be used directly with CFP/CXP 100G transceivers or, when used together with transition modules/cables, can provide 40/100G parallel transceivers or legacy non-parallel optics 4/8/10/16G Ethernet/ fiber channel protocol networks.
View details →Let's build it together
Our engineers are one message away — from design and supply to installation, testing and handover.
